Anti barrel crash barrier series This product is made of imported high-quality PE.wilh good heat-re sistant, cold-resistant. shock-resistant, and not easy to age. It can be a good buffer after being filled with water and can be moved flexibly without water. Normally this product is yellow. lt will be very attractive with refle ctive film stuck outside. lt is widely used on the highway exits. cr ossroads. toll station, gas station, or on the bridge. lt is proved to have a great function for warning drivers and reducing the hurt i n an accident. lt is good protection for cars and for lives. 2 Holes Blow Molding Plastic Barrier DW-SM02 Model DW-SM02 Top/Bottom 120mm/280mm Height 600 mm Length 1060 mm Tensile strength 16.44 Mpa Elongation at break 264% Characteristics: 1.Colourful:you can choose any colour which you like,such as red,b lue,etc. 2.Portable:they are easy to use,such as highway,road,supermarket,et c. 3.Highly Visible:with eye-catching reflective film. 4.Modle:made by advanced technology,not easy to be out of shap e and impact-resistent. 5.Durable:because they are made of new plastic material Blow Molding Plastic Crash Barrel DW-T01 Model DW-T01 Diameter 580 mm Height 825 mm Water capacity 200 kg Tensile strength 16.44 Mpa Elongation at break 264% Characteristics: 1.Colourful:you can choose any colour which you like,such as r ed,blue,etc. 2.Portable:they are easy to use,such as highway,road,supermark et,etc. 3.Highly Visible:with eye-catching reflective film. 4.Modle:made by advanced technology,not easy to be out of s hape and impact-resistent. 5.Durable:because they are made of new plastic material. CONTACT US Add:Jiangnan Road,Jiali Square 6th,High-tech district,Ningbo,Zhejiang Province, China. Tel: +86-0574-87912001 E-Mail:[email protected] Website: https://www.dingwang.net/product/
