caricato da shinehe23

High Speed Injection Molding Machine

annuncio pubblicitario
Ningbo Beilun Highsun Machinery Co., Ltd.
High Speed Injection Molding Machine
(1)HXH 160
The computer control system uses bus communication such as CANbus EtherCAT to
achieve full digital control.
The temperature control uses a dedicated control module with an accuracy of 1 degree.
It has a power monitoring function to monitor the energy consumption of current
HXH 520
Graphite steel sleeve is used at the elbow link and the guide rod, which is lubricated with
thin oil and has better bearing capacity and wear resistance. Give the machine a longer
The switch mode action is controlled by a proportional directional valve, which has the
characteristics of rapid acceleration of motion, stable high-speed operation, and precise
control of the position of the mold opening.
HXH 350
The hydraulic system adopts dual servo drive control, which has the advantages of high
efficiency, energy saving and low noise, and can realize the functions of mold opening
and material storage synchronization.
Based on many years of experiments and research, Haixiong Thin Wall High Speed
Machine series is specially designed for products with short molding cycle and high speed
injection molding. Excellent performance in terms of motion characteristics, machine
accuracy, and service life.
Widely used in the production of packaging plastic products, medical plastic products, 3C
electronic products.
Contact Us
ADD:No.36 Yongjiang South Road, Beilun District,Ningbo,315800, China
TEL:0086-188 6861 6288/0086-136 8570 6288
E-MAIL:[email protected]